manualshive.com logo in svg

Gateway M520, User Manual, Page: 53 / 168

Share
Download
Gateway M520 User Manual Download Page 53

47

www.gateway.com

To remove a memory card:

1

If you are removing a CompactFlash card or IBM Microdrive, release 
the eject button by pressing the eject button once, then eject the 
card by pressing the eject button again.

-OR-

If you are removing a MemoryStick, MemoryStick Pro, SecureDigital, 
or MultiMediaCard, push the memory card into the notebook. The 
memory card pops out slightly.

2

Pull the memory card out of the notebook.

3

Insert the protector into the memory card slot.

Adding and removing a PC Card

Your notebook has a PC Card slot (also known as a PCMCIA card slot). 
This slot accepts one Type II card.

You do not need to restart your notebook when changing most cards 
because your notebook supports hot-swapping. Hot-swapping means that 
you can insert a PC Card while your notebook is running. If your PC Card 
does not work after hot-swapping, see the PC Card manufacturer’s 
documentation for further information.

Important

Do not use the remove hardware

icon in the 

taskbar to remove the memory card.

Summary of Contents for M520









































































































































































Reviews:

No comments