manualshive.com logo in svg

Gateway M520, User Manual, Page: 147 / 168

Share
Download
Gateway M520 User Manual Download Page 147

141

www.gateway.com

■

When the notebook is turned off, a small amount of electrical current still flows through 
the notebook. To avoid electrical shock, always unplug all power cables and modem 
cables from the wall outlets before cleaning the system.

■

Unplug the system from the wall outlet and refer servicing to qualified personnel if:

■

The power cord or plug is damaged.

■

Liquid has been spilled into the system.

■

The system does not operate properly when the operating instructions are followed.

■

The system was dropped or the cabinet is damaged.

■

The system performance changes.

Replacement parts and accessories

Use only replacement parts and accessories recommended by Gateway.

Warning

Do not use Gateway products in areas classified 
as hazardous locations. Such areas include patient 
care areas of medical and dental facilities, 
oxygen-laden environments, or industrial facilities.

Warning

To reduce the risk of fire, use only No. 26 AWG or 
larger telecommunications line cord.

Summary of Contents for M520









































































































































































Reviews:

No comments