Gateway GM5260, Hardware Reference Manual

Page: 30 / 52

CHAPTER 3: Maintenance Basics www.gateway.com
26
Replacing the rear fan
Tips & Tricks
You need a Phillips screwdriver to replace
the rear fan.
To replace the rear fan:
1
Remove the side panel by following the instructions in “Removing the side
panel” on page 14 .
2
Disconnect the fan from the system board.
3
Remove the four screws on the outside of the case that secure the fan to
the back of the case, then remove the fan.
4
Place the new fan on the back of your computer, then replace the screws
that secure it to the back cover.
5
Reconnect the fan cable to the system board.
6
Replace the side panel by following the instructions in “Replacing the side
panel” on page 16 .
7
Reconnect all external cables and the power cord.
8
Turn on your computer.
Screws Screws