Gateway E1400 System Manual Download Page 40

Page: 40 / 136

Replacing the CD drive

Replacing the CD drive

The CD drive is attached to the drive cage by a drive locking tab. You do not
have to remove any screws to remove or install a CD drive.

To replace the CD drive:

Turn off the computer, disconnect the power cord, modem cord (if
installed), and all external peripheral devices.

Remove the right panel. (See “Removing the side panels” on page 19 and
observe the “Static electricity precautions” on page 17.)

Disconnect the power, data, and audio cables from the back of the drive.

Release the drive locking tab from the drive bay by turning the knob on
the tab counter-clockwise to the unlock position, then remove the tab
from the drive cage.

Drive locking tab

05960.book Page 33 Monday, February 21, 2000 2:47 PM

Summary of Contents for E1400









































































































































Search results

Summary of Contents for E1400

Reviews:

Related manuals for E1400

Brands by name

Popular brands

Gateway E1400, System Manual

Search results

Summary of Contents for E1400

Reviews:

Related manuals for E1400

Brands by name

Popular brands