61
www.gateway.com
Configuring your onboard RAID solution
Your server comes equipped with an onboard, chipset SATA RAID solution, which supports
RAID levels 0 (striping) and 1 (mirroring). The onboard RAID solution can be enabled in
the BIOS (
) and configured by launching the RAID BIOS console during the boot
process.
Configuring the onboard SATA RAID solution
To launch the SATA RAID BIOS console:
1
Restart your server.
2
Press
F2
when the Gateway logo screen appears during startup. The BIOS Setup utility
opens.
3
From the
Main
BIOS menu, select the
Advanced
menu.
4
Select the
IDE Configuration
sub-menu.
5
For the
Configure S-ATA as RAID
option, select
Enabled
.
6
Exit the BIOS Setup utility.
7
Restart your server.
8
During the boot process you will see the following message:
Press <Ctrl>-<E> for BIOS Console
Level
Description and use
Pros
Cons
Number
of drives
Fault
Tolerant
0
Data divided into blocks and
distributed sequentially (pure
striping). Use for non-critical data
that requires high performance
High data
throughput for
large files
No fault tolerance.
Data is lost if a drive
fails.
One or
two
No
1
Data duplicated on another disk
(mirroring). Use for
read-intensive, fault-tolerant
systems.
100 percent
data
redundancy,
providing fault
tolerance.
More disk space
required. Reduces
usable disk space
to the size of the
smallest drive.
Reduced
performance during
rebuilds.
Two
Yes
Summary of Contents for 9315
