Gateway 3350, User Manual, Page: 277 / 291

270
European users
The following information is only applicable to systems labeled with the CE mark .
European directives
This Information Technology Equipment has been tested and found to comply with the
following European directives:
■
EMC Directive 89/336/EEC amending directive 92/31/EEC & 93/68/EEC as per
- EN 55022:1998 Class B
- EN 61000-3-2:1995
- EN 61000-3-3:1995
- EN 55024:1998 according to
EN 61000-4-2:1995
EN 61000-4-3:1996
EN 61000-4-4:1995
EN 61000-4-5:1995
EN 61000-4-6:1996
EN 61000-4-8:1993
EN 61000-4-11:1994
■
Low Voltage Directive (Safety) 73/23/EEC as per EN 60950:1992(A1/A2/A3/A4/A11)
European telecommunication information (for products fitted with EU-approved
modems)
Marking by the symbol indicates compliance of this equipment to the Radio and Telecom
Terminal Equipment Directive 199/5/EC. Such marking is indicative that this equipment meets
or exceeds the following technical standards:
CTR 21 (1998) - Attachment requirements for pan-European approval for connection to the
analogue Public Switched Telephone Networks (PSTNs) of TE (excluding TE supporting voice
telephony services) in which network addressing, if provided, is by means of Dual Tone
Multi-Frequency (DTMF) signaling.
This equipment has been approved to Council Decision 98/482/EEC—“CTR 21” for
Pan-European single terminal connection to the Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in different countries, the
approval does not, of itself, give an unconditional assurance of successful operation on every
PSTN termination point. In the event of problems, you should contact Gateway customer
support.
Warning Although this equipment can use either loop disconnect
(pulse) or DTMF (tone) signaling, only the performance of
the DTMF signaling is subject to regulatory requirements
for correct operation. It is therefore strongly recommended
that the equipment is set to use DTMF signaling for access
to public or private emergency services. DTMF signaling
also provides faster call setup.