manualshive.com logo in svg

Gateway 3350, User Manual, Page: 237 / 291

Share
Download
Gateway 3350 User Manual Download Page 237

230

          Troubleshooting

Safety guidelines

While troubleshooting your computer, follow these safety guidelines:

■

Never access internal components while your computer is turned on.

■

Make sure you are properly grounded before accessing internal 
components. For more information about preventing damage from static 
electricity, see “Adding PC Cards” on page 132.

Troubleshooting

If you have problems with your computer, try these things first:

■

Make sure the power adapter is connected to your computer and an 
AC outlet and that the AC outlet is supplying power.

■

If you use a power strip or surge protector, make sure it is turned on.

■

If a peripheral device does not work, make sure that all connections are 
secure.

■

Make sure that your hard drive is not full.

■

If an error message appears on the screen, write down the exact message. 
The message may help technical support in diagnosing and fixing the 
problem.

■

If you added or removed modules or peripheral devices, review the 
installation procedures you performed and make sure you followed each 
instruction.

■

If an error occurs in a program, consult the printed documentation or 
the online help.

Important

Do not try to troubleshoot your problem if power cords or 
plugs are damaged, if your computer was dropped, or if 
the cabinet was damaged. Instead, unplug your computer 
and contact a qualified computer technician.

HelpSpot

For more information on troubleshooting, double-click the 
HelpSpot icon on your desktop.

Summary of Contents for 3350




































































































































































































































































































Reviews:

No comments