22
Using the Gateway 205 Projector
www.gateway.com
Operating the projector
After you have connected all components to the projector, you are ready to
begin using the projector.
Starting the projector
To start the projector:
1
Press the POWER button. The power LED turns on.
2
Turn on the connected components.
After all components are running, allow about 30 seconds for the display
image to appear. If the power LED is not green or you do not see a display
image, check the connections. For more troubleshooting information, see
“Troubleshooting” on page 32.
3
Use the lens adjustment wheels to adjust the display image.
You can also use the on-screen display (OSD) to make additional display
setting adjustments if necessary. For more information, see “OSD options”
on page 23.
