Camera / Housing setup
Page 8
Gates Underwater Products, Inc
13685 Stowe Drive • Poway, CA • 92064 • 858.391.0052 • 800.875.1052 • 858.391.0053
[email protected] • www.GatesHousings.com
Microphone information.
If you have the optional microphone installed, set the
camera as described in detail on page
27
.
Install
a memory card and charged battery.
Remove any caps,
lenses or filters from the
camera lens. Slide the
focus ring into the
forward position.
Tighten the handstrap to
it’s closest position.
Remove the eyepiece
from the viewfinder.
Place the Viewfinder
Tilt Gage as shown,
then rotate the
camera viewfinder
down onto the gage to
set alignment with the
housing Magnified
Viewfinder.
Note that the gage can
be secured to the
camera headphone
jack.
