Gates Z100, Setup, Use And Care Manual

Page: 32 / 34

Optional External Monitor EM50 or EM43 Page 32
Gates Underwater Products, Inc
13685 Stowe Drive • Poway, CA • 92064 • 858.391.0052 • 800.875.1052 • 858.391.0053
Customer.srvc@GatesHousings.com • www.GatesHousings.com
3. Connect to the
camera with the short
HDMI patch cable
provided with your
EM50.
Monitor mounting and Connection –EM50

Slide the dovetail and monitor into the grooves on top of the housing and tighten in
place with the thumbscrews (similar to the EM43 above)

Insert the HDMI connector through the bulkhead pass through as shown below.

Route the HDMI connector to the rear of the housing.

Connect to the camera with the HDMI patch cable.
1. Insert the EM50 cable to
the pass through bulkhead
connection;
2. Route the cable to the
rear of the housing;