The XA10 / HF-G10 Setup
Page 13
Remote Button Arm Installation
The Remote Button Arm can be installed to aid actuation of the remote push buttons. It
provides a firm handle grasp closer to the buttons. The arm is a standard part included
with your housing, but not installed.
Locate Button Arm
onto the top left handle with bend facing up and toward the
remote buttons.
Position the arm
in the position you desire, then tighten the mount screw with the
5/32 allen tool.
Secure the arm in position
by tightening the set screw using the 3/32 allen tool.
Tighten only enough to secure the arm, but do not overtighten.
Mount screw: Use 5/32 Allen tool.
Set screws: Use 3/32 Allen tool.
