13
GATES.COM
OPTICAM 4S / OPTICAM 4S DP
OPERATING MANUAL
6.2 ASSEMBLY, SETTING UP AND START-UP
DANGER!
During transport it must be ensured that on
obstacles impede the work and transport processes
and that no persons or materials are located in the
transport route and danger area.
Work on the cutting ring assembly device Opticam
4S may only be carried out by a person who
possesses the necessary physical and mental
capabilities.
Unauthorised persons are to be kept away from the
danger area during all life phases of the machine.
6.2.1 Connect device to power supply
Before start up remove blanking plug of tank and
mount the separately delivered venting plug.
The installed power cable is to be connected to the
power supply with a suitable plug socket.
On the terminal strip attached on the right side
the user is provided with the following additional
connection options:
LAN interface
Measurement connection
Foot switch
Two reserve connections.
DANGER!
All components of the cutting ring assembly device
are optimally coordinated to form a compatible set.
The use of any other accessories may lead to
damages and result in the loss all warranty,
guarantee and claims for damages.
The user must provide for suffi cient lighting
at the setup and operating location of the
cutting ring assembly device in order to rule out
possible dangers.
6.2.2 Requirements of the installation site
The installation site for the cutting ring assembly
device is to be prepared in such a manner that:
a permanently stable underground
at a work height of 0.80 to 1.10 m
is available for the entire cutting ring
assembly device as a supporting surface.
The conditions and the spatial requirement at the
installation site are to be selected in such a manner
so as to ensure the cutting ring assembly device is
well accessible at all times in order to ensure the
simple and safe handling of the device.