MC2000 USER GUIDE
8
3 - OPERATING INSTRUCTIONS
3. 1 -
SAFETY:
Safety glasses must be worn during machine operation.
The crimper must be positioned on a stable bench or frame.
Do not put your hand in the crimping head during its operation.
Do not alter the technical characteristics of the crimper (pressure and other parameters).
3. 2 -
UNPACKING - INSTALLATION :
Unpack the machine without destroying the packaging. The machine can only be transported or
received at a later point in time if it is inside its original packaging. Ensure therefore that the
packaging is not damaged when opening it, so that it can be stored.
Lift the box cover, then remove the screws positioned at the bottom of the packaging uprights,
remove the uprights from the box. The crimper is now accessible and can be taken out.
Never hold the machine by its crimping head or by any of its components.
For optimum use and reduced operator fatigue, it is recommended that the crimper is positioned
horizontally on a bench at a height of approximately 0.75m.
Once the machine has been placed on its support, fit the pump handle by inserting it into its
socket situated at the top of the pump body. Secure with butterfly screw.
The warranty will be void if the above unpacking and/or installation procedures are not
followed.
