Gates GC32-XD, Manual

Page: 173 / 183

* See Adjustment Procedures and Footnotes at the end of mobileCrimp 4-20 DD & PS section.
HOSE STEM FERRULE SPECIFICATIONS
DASH
SIZE
DESCRIPTION
SIZE
(IN)
WORK.
PRESS.
(PSI)
TYPE DESCRIPTION
SKIVE
LENGTH
(IN) (+/-0.03)
SKIVE
DIAMETER
(IN)
CRIMP
INSERTION
LENGTH
(IN) (+/-0.03)
CRIMP
LENGTH
(IN) (+/-0.03)
CRIMP
OUTSIDE
DIAMETER
(IN) (+/-0.01)
CRIMP TAIL
LENGTH
(IN) (+/-0.1)
DIE
SET
APPROX.
SETTING
MANUAL
USER
ENTRY
5 TH7NC 0.31 2500 5G One-Piece NONE NONE FULL FULL 0.766 NONE MC31 485
6 TH7NC 0.38 2250 6G One-Piece NONE NONE FULL FULL 0.864 NONE MC22 315
6 TH7NC 0.38 2250 6G One-Piece NONE NONE FULL FULL 0.864 NONE MC32 315
8 TH7NC 0.50 2000 8G One-Piece NONE NONE FULL FULL 1.026 NONE MC33 295
12 TH7NC 0.75 1250 12G One-Piece NONE NONE FULL FULL 1.321 NONE MC35 209
16 TH7NC 1.00 1000 16G One-Piece NONE NONE FULL FULL 1.691 NONE MC37 140
4 TH7S 0.25 2750 4G One-Piece NONE NONE FULL FULL 0.715 NONE MC21 250
4 TH7S 0.25 2750 4G One-Piece NONE NONE FULL FULL 0.715 NONE MC31 385
5 TH7S 0.31 2500 5G One-Piece NONE NONE FULL FULL 0.766 NONE MC31 485
6 TH7S 0.38 2250 6G One-Piece NONE NONE FULL FULL 0.864 NONE MC22 315
6 TH7S 0.38 2250 6G One-Piece NONE NONE FULL FULL 0.864 NONE MC32 315
8 TH7S 0.50 2000 8G One-Piece NONE NONE FULL FULL 1.026 NONE MC33 295
4 TH7SNC 0.25 2750 4G One-Piece NONE NONE FULL FULL 0.715 NONE MC21 250
4 TH7SNC 0.25 2750 4G One-Piece NONE NONE FULL FULL 0.715 NONE MC31 385
5 TH7SNC 0.31 2500 5G One-Piece NONE NONE FULL FULL 0.766 NONE MC31 485
6 TH7SNC 0.38 2250 6G One-Piece NONE NONE FULL FULL 0.864 NONE MC22 315
6 TH7SNC 0.38 2250 6G One-Piece NONE NONE FULL FULL 0.864 NONE MC32 315
8 TH7SNC 0.50 2000 8G One-Piece NONE NONE FULL FULL 1.026 NONE MC33 295
4 TH8 0.25 5000 4G One-Piece NONE NONE FULL FULL 0.750 NONE MC21 310
4 TH8 0.25 5000 4G One-Piece NONE NONE FULL FULL 0.750 NONE MC31 445
6 TH8 0.38 4000 6G One-Piece NONE NONE FULL FULL 0.880 NONE MC22 345
6 TH8 0.38 4000 6G One-Piece NONE NONE FULL FULL 0.880 NONE MC32 345
8 TH8 0.50 3500 8G One-Piece NONE NONE FULL FULL 1.035 NONE MC33 315
12 TH8 0.75 2250 12G One-Piece NONE NONE FULL FULL 1.350 NONE MC35 270
16 TH8 1.00 2000 16G One-Piece NONE NONE FULL FULL 1.780 NONE MC37 380
4 TH8NC 0.25 5000 4G One-Piece NONE NONE FULL FULL 0.750 NONE MC21 310
4 TH8NC 0.25 5000 4G One-Piece NONE NONE FULL FULL 0.750 NONE MC31 445
6 TH8NC 0.38 4000 6G One-Piece NONE NONE FULL FULL 0.880 NONE MC22 345
6 TH8NC 0.38 4000 6G One-Piece NONE NONE FULL FULL 0.880 NONE MC32 345
8 TH8NC 0.50 3500 8G One-Piece NONE NONE FULL FULL 1.035 NONE MC33 315
12 TH8NC 0.75 2250 12G One-Piece NONE NONE FULL FULL 1.350 NONE MC35 270
16 TH8NC 1.00 2000 16G One-Piece NONE NONE FULL FULL 1.780 NONE MC37 380
4 TR500 0.25 500 4G One-Piece NONE NONE FULL FULL 0.679 NONE MC21 170
4 TR500 0.25 500 4G One-Piece NONE NONE FULL FULL 0.679 NONE MC31 315
6 TR500 0.38 500 6G One-Piece NONE NONE FULL FULL 0.809 NONE MC22 205
6 TR500 0.38 500 6G One-Piece NONE NONE FULL FULL 0.809 NONE MC32 205
8 TR500 0.50 500 8G One-Piece NONE NONE FULL FULL 0.980 NONE MC33 204
10 TR500 0.63 500 10G One-Piece NONE NONE FULL FULL 1.130 NONE MC34 190
12 TR500 0.75 500 12G One-Piece NONE NONE FULL FULL 1.299 NONE MC35 156
8 WJ1100 0.50 16000 8WTB-SS 8WTB2F-4SS 1.571 WIRE FULL FULL 1.140 NONE MC34 100
MOBILCRIMP 4-20 CRIMP DATA (POSITIVE STOP): ADJUSTMENT PROCEDURES AND FOOTNOTES
1
GLX couplings are only crimped on the rear of the ferrule, the final crimp should have a bubble at the connection end of the ferrule.
2
See figure for proper alignment of coupling in die prior to crimping
3
To achieve the proper tail length, line up the hose end of the ferrule with “locating step” on the die inside diameter (see figure) prior to crimping.
4
Buff required only if hose OD prohibits insertion.
5
For Air Conditioning couplings center the die fingers over the ferrule (see figure).
6
COD is shown for the center band, the band on the hose end of the ferrule should have a COD +0.02 in (0.695 in, see figure for measurements).
GENERAL
SWA
GING
GC32-XD/FLEX
GC96
PC707/SC32
GC16XD
MC 4-20 DD & PS
PO
WER STEERING
172 DOWNLOAD THE ECRIMP APP OR GO TO WWW.GATES.COM/ECRIMP
MOBILECRIMP 4-20 CRIMP DATA (POSITIVE STOP)
GATES