![background image](http://html1.mh-extra.com/html/gates/ax100/ax100_setup-use-and-care-manual_3744861007.webp)
The AX100 Setup
Page 7
3:
The AX100 Setup
Handle Installation
If the handles are not already installed on the AX100 Housing, perform this step first.
Secure the handle arms
to the housing using the 10-32 x 0.5”L socket cap screws.
Tighten with the supplied 5/32 hex tool.
Secure the grips
to the handle arms using the 1/4-20 x 1” L socket cap screws.
Tighten firmly with the supplied 3/16 hex tool.
NOTE the handle grips are adjustable.
They can be closer or further away from
the housing as shown in the image below. Remove the 1/4-20 x 1”L socket cap
screw and reposition as desired.
The grips can be adjusted to your
preference.