The XA35 Setup
Page 14
Remote Button Arm Installation
The Remote Button Arm can be installed to aid actuation of the remote push buttons. It
provides a firm handle grasp closer to the buttons. The arm is a standard part included
with your housing, but not installed.
Locate Button Arm
onto the top left handle with bend facing up and toward the
remote buttons.
Position the arm
in the position you desire, then tighten the mount screw with the
5/32 hex tool.
Secure the arm in position
by tightening the set screws with the 3/32 hex tool.
Tighten only enough to secure the arm, but do not overtighten.
Mount
screw: Use
5/32 Allen
tool.
Set screws: Use 3/32 Allen tool.
