manualshive.com logo in svg

Gates Underwater Products XA35, Setup, Use And Care Manual

Share
Download
Gates Underwater Products XA35 Setup, Use And Care Manual Download Page 5

Introducing the XA35 

Page 5 

 

Unpacking the XA35 

After you remove the XA35 from its shipping container, carefully inspect it for missing 
parts or damage that may have occurred during shipment. If you discover any 
discrepancies, contact Gates or your dealer immediately for assistance. 

Standard Parts 

The XA35 comes with the following standard items: 

 

The XA35 Housing 

 

Various assembly tools and spare parts for the XA35 including hex tools, 
mounting screws, o-rings and lubricant.  

 

Port(s) of choice (Dome, Flat, Wide Angle, etc) 

 

Removable Handles (which may already be affixed to the housing) 

 

Remote Button Arm including mount and set screws. 

 

Optional Parts 

Your housing may also come with optional items: 

 

Water Alarm  

 

Light System (user install) 

 

Seal Check 

 

HD-SDI Surface Feed Video 

 

Carry Handle 

 

Tripod / Tripod Adapter 

 

 

Summary of Contents for XA35

































Reviews:

No comments

Brands by name

Popular brands

Load more brands