MINI LF Housing Setup
Page 28
Housing Closure
Pull out the Power Trigger.
The Power Trigger on the side of the housing must be
pulled out in order for the rear shell to be installed freely.
General.
The Rear Shell slides from the rear, over the camera and mates with the
Mid Shell. If there is obstruction at any time during this process
– stop! – remove
the shell and locate the obstruction.
Mate the shell.
Position the shell at the rear and gently move forward over the
camera to mate with the Mid Shell.
CAUTION: AVOID OBSTRUCTIONS.
The Rear Shell should slide freely,
without obstruction. If obstructions or resistance are encountered, stop.
Remove the camera, find the cause of the obstruction, and try again.
Retract the Power Control before installing
the Rear Shell.
