MINI LF Housing Setup
Page 23
Port Base, Port and Port Rings
Inspection.
Before installing the Port Base, Port and Port Rings, visually inspect
the o-rings for dirt or other foreign matter that may compromise the seals. Do the
same with the Front Shell face (where the Port Base mates) and Port bore where
the o-rings seal.
See the separate
document “Housing Care and Maintenance
Guide” for more details.
CAUTION
: Do Not lubricate
the orange Port Base o-ring. It is silicone material and
lubricant may cause damage.
Only the BLACK and YELLOW o-rings are safe to
lubricate.
Install the Port Base.
Position the Port Base
over the entire lens / LGD’s and
secure to the front shell with 4 screws/washers. Tighten the 4 screws firmly.
Install Port Base with 4
screws and washers.
