MINI LF Housing Setup
Page 11
Port Base.
Remove 4 screws/washers, then the Port Base.
Pull out the Power Trigger.
The Power Trigger is located on the left side of the
Rear Shell. It must be fully retracted in order for the rear shell to be removed without
obstruction.
Rear Shell removal.
Release three (3) latches by depressing the lock and pulling
up on the latch. Once released the rear shell will remove freely.
Remove 4 screws and washers, then the
Port Base.
Slide the rear shell back until
it's free from the housing.
Retract the Power Control before
removing the Rear Shell.
