C300 MKII Operation
Page 39
Tripod Legs (Optional)
Tripod Legs are optionally available to mount directly to the C300 MKII housing.
Rear Tripod Leg
is installed as shown on a bracket with two 10-32 bolts to the
housing.
Front Tripod Legs
are secured to the front foot as shown. First install the ball
mount and secure very tightly with a wrench to prevent accidental unthreading.
Then attach the Tripod Leg and clamp.
The rear Tripod leg is
mounted as shown to
the rear shell with a
bracket and 2x 10-32
bolts + 2x #10
washers per bolt.
The right and rear
Tripod legs are
shown ready for
use. The legs are
extensible from 7 to
18 inches.
The front Tripod legs are
mounted here, on the leading
section of the foot. Thread the
ball mount into the foot and
screw very tightly with a
wrench.
This leg is shown collapsed and
tucked when not in use.
