C300 MKII Setup
Page 24
The alarm can be tested anytime by shorting the detection contacts that lead to the
water alarm transducer. The water detection condition will activate for 6 seconds. If the
battery is drained the low battery condition will sound.
The water alarm requires a single 6V battery like Radio Shack model 23-469 or A544.
Your battery should be removed when stored (e.g. between dive trips). Check the
battery prior to every die to ensure proper operation. Change when indicated.
CAUTION
: You must wait a minimum of 30 seconds between battery insertions to allow
the unit to fully discharge.
Water Alarm siren and
battery installed into the
Rear Shell
