SV12
User Manual & Install Guide
22 of 26
In the picture, top left corner, the software did not mark the marks on the mat. To finish the calibration,
the user needs to mark them.
Double click on the picture that is not marked. This will open the picture in the full screen.
For Other Pattern Mats
The cursor will change to the magnifier.
1.
Select the “Tag Position” to 1.
2.
Mark the 1
st
mark on the “A” corner of the mat that on the left side in the picture.
3.
Then select the
“Tag Position” to
2, and mark the 2
nd
mark on the “B” corner of the mat, 3
rd
mark
for corner “C”, and 4
th
mark is for the
corner “D”.
4.
Finish all 4 marks on the mat and move to the second mat.
5.
Then repeat the steps from 1 to 4, but this time the but the “Tag Position” on “A” corner side of
the mat will be starting from 5.
After marking, press okay and move to
For Chess Pattern Mats
Marks the corner of the mats as shown in figure.
