Burst mode enables you to make 3-shot series. In this way you can
save ammunition and increase the realism. You can change AUTO
mode to BURST mode or SEMI* mode to BURST mode.
If in SAFE/SEMI/BURST mode you release the trigger earlier, you can
make one or two shots. The burst time is set in the menu with accuracy
to 4ms. The processor actively compensates for the change in burst
time with a decrease in the rate of fire due to battery discharging.
3-rd burst
The function gives you the option to program your fire selector.
There are five modes:
Configurable Fire Selector
This ensures there is no loss of the rifle’s rate of fire, so you can use
stronger LiPo batteries, and still have ROF just like in a real gun.
Rate Of Fire Control
We know how vital the fast trigger response is during combat. This is
why we have developed the Smart Trigger function. It enables you to
achieve a faster trigger response. It works with the ROF Control
system. During the first shot, the microprocessor sets the ROF Control
to 100%. After the first shot, it switches to a previously programmed
value (e.g. 50%). As a consequence, the first shot is fired at a full rate of
fire, and subsequent shots at a reduced ROF. The best results can be
achieved by using a battery with a higher than standard voltage. For
example, if you use a 7.4V battery, you can replace it with 11.1V. In this
way, you will achieve a faster trigger response with the same rate of
fire as with a standard battery. The Smart Trigger is most effective
when the Burst time is set at 3 rounds.
Smart Trigger
09
WWW.GATEE.EU
USER GUIDE
WARFET
- STOCK WIRING SEMI/AUTO
- STOCK WIRING SEMI/BURST
- MODIFIED WIRING SEMI/AUTO
- MODIFIED WIRING SEMI/BURST
- MODIFIED WIRING BURST/AUTO
*SEMI to BURST in enhanced mode only
