MOSFET
Do you want to achieve a higher rate of fire and faster trigger
response? Are you planning a power upgrade of your rifle? In that
case, you need a MOSFET.
It targets the energy from the battery directly to the motor, bypassing
the mechanical trigger contacts. As a result, you gain a higher rate of
fire of the rifle and a faster trigger response, and the contacts are
protected against burn out.
Debouncing
This provides full compatibility with the micro-switches. It ensures full
resistance to contact bounce (vibration). You gain a bigger ROF, a
faster trigger response and your MOSFET is less prone to overheating.
Built-In Self-Test
It allows you to quickly check whether the
works properly.
If you have problems with your AEG, the BUILT-IN SELF-TEST allows you
to check that the problem is not caused by the Power Module.
Power Module
rd
3 Generation MOSFET
The advent of modern transistors and microcontroller has enabled us
to create the smallest and most reliable Power Module on the market.
Dark Mode
DARK MODE allows you to turn off the green LED which lights up
when a gun is firing. This function is especially useful during night
games.
Coating
Thanks to its special conformal coating, it is resistant to atmospheric
conditions (Military Specification MIL-V-173C).
14.8V LI-PO Ready
The system can be used with batteries up to 14.8V LI-PO. Minimum
operating voltage is 3V and maximum voltage is 17V.
11
WWW.GATEE.EU
USER GUIDE
WARFET
