Gate Titan, User Manual, Page: 77 / 101

77
Caution
The improper placement of wiring under motor gear can cause insulation
damage and a short circuit. In order to secure the wires properly we recommend
to perform a gearbox modification as shown in the photos below.
Notice
The selector plate requires modification. Place the selector sticker according
to the photos below. The sticker position is very important.
Notice
In case of TITAN V2 NGRS pre-cocking setup via fire selector is
different than in case of TITAN V2, due to presence of mechanical
trigger safety lever. In order to set the pre-cocking:
1. Switch fire selector to SEMI, fire the shot and keep the trigger pulled.
2. While the trigger is pulled you are able to select pre-cocking mode:
• SEMI = Pre-cocking OFF
• AUTO = Pre-cocking AUTO
Setting pre-cocking mode to ‘TRIGGER’ option can be done only via GCS.