manualshive.com logo in svg

Gate Titan, User Manual, Page: 4 / 101

Share
Download
Gate Titan User Manual Download Page 4

4

2.  Basics and safety summary

Please read this manual before using the device to ensure safe and proper use. 

Information contained in this document is subject to updating without notice. Please check if 
you have downloaded the latest manual from the Technical Support section of our website:

 

https://www.gatee.eu/technical-support/manuals

The Product Warranty Form is also available there:

 

https://www.gatee.eu/technical-support/warranty

GATE Enterprise spółka z ograniczoną odpowiedzialnością sp. k. does not take any 
responsibility for damages, injuries and accidents resulting from the use of this product or 
the use of Air Electric Gun with the product installed. In case you have any difficulties while 
installing or using this product, we recommend to contact us. Our support team will answer all 

your questions and send you some hints.

In order to contact GATE, you can:

a)  email us at 

[email protected]

 

b) 

contact us via Facebook: 

www.facebook.com/gatee

c)  call (+48) 122-100-523

Warning 

Situations that could cause injury to yourself and others.

Caution 

Situations that could cause damage to your device or other equipment.

Notice 

Notes, usage tips, or additional information.

2.1.  Safety

Notice 

We recommend that this product should be installed by an experienced 
airsoft service. Before starting installation process, please ensure 
that your AEG is empty and there are no BBs inside.

Warning 

Incorrectly connecting positive and negative battery terminals will cause 
immediate damage to the drop-in module what is not covered by the 
warranty and it can lead to fire, burn or even battery explosion.

Summary of Contents for Titan






































































































Reviews:

No comments