manualshive.com logo in svg

Gate Titan, User Manual, Page: 13 / 101

Share
Download
Gate Titan User Manual Download Page 13

13

4.  TITAN Kits 

At this moment, TITAN is available for three different types of gearboxes. There is:

• 

TITAN V2 which is compatible with most V2 gearboxes

• 

TITAN V3 which is compatible with most V3 gearboxes

• 

TITAN V2 NGRS which is compatible with Tokyo Marui V2 NGRS gearboxes

Furthermore, TITAN V2 and TITAN V2 NGRS are divided in two types. Depending on where you 
keep the battery, you can choose between FRONT and REAR wiring.

TITAN V3 has one universal type of wiring. If you have battery in buttstock, you can use 

additional buttstock extension. 
 

All the TITANs are available in two sets: 

Advanced Set 

and 

Basic Module

.

 

                      

Case 1

1.  Do you have USB-Link? NO.
2. 

Do you prefer ADVANCED firmware or BASIC firmware edition? ADVANCED.

3.  You should buy TITAN Advanced Set. 

Case 2

1.  Do you have USB-Link? YES.
2. 

Do you prefer ADVANCED firmware or BASIC firmware edition? ADVANCED.

3. 

You should buy TITAN Basic Module and Advanced Firmware Upgrade. 

Summary of Contents for Titan






































































































Reviews:

No comments