Gastrodomus SFO500B, User Manual

Page: 62 / 73

Chapter 5 - Machine operation
23
5.3 Operating modes
The machine operates in manual mode following the instructions described in Chapter 5
Machine operation on page 22
5.4 Machine switching on
To switch the machine on proceed as follows:
1. Turn the knife-switch situated upstream from the outside power supply cable to position I .
5.5 Tooling, adjustments and setting up
Adjustment warnings
1. All adjustment, checking or cleaning operations must be carried out with the machine at a
standstill and the electric control box off. The main on-off switch must be set to position O
and padlocked;
Any operation carried out while the wiring system is live can cause
serious injuries.
2. Pay special attention to the moving parts of the machine.
3. Take special care when activating the start buttons and only activate these after making
sure that persons or things are in no danger.
4. If the guards or safety barriers have been removed, make sure they are correctly re-
installed before using the machine again.
5. Do not rest tools or other objects on the machine, either when operating or off.
5.6 Switching off the machine
To switch the machine off:
1. Turn the knife-switch situated upstream from the outside power supply cable to position
"O".
NOTE Always clean the machine and the working area at the end of the working
cycle.