Gastrodomus SFO500B, User Manual

Page: 56 / 73

Chapter 4 - Installation
17
4.3 Transport
The instructions given in this section should be carefully followed when transporting the
machine. This operation may include the following situations:
• Storage of the machine.
• Initial installation of the machine.
• Re-location of the machine.
Transport conditions
The machine and its equipment can be transported in the following ways, according to the
customer's requirements:
• Carton on pallet.
• Wooden crate.
• Pallet.
• In each of these cases, before transport or handling, the various accessories must be
packed and fastened to the machine.
NOTE Follow standard precautions to avoid collisions and tipping over.
Symbols on the machine packing
The following symbols are shown on the machine packing:
• Handle with care.
• Centre of gravity.
• Hooking point.
• Store in a dry place.
• This side up.
• CE marking.
Lifting
DANGER • It is forbidden to climb onto the machine and/or its packing or stop
and/or pass under the machine during handling.
• Access to the lifting and handling area is denied to all personnel except
those directly involved in the operations.
• All operators should remain at a safe distance in order to avoid being hit
by the machine or any of its parts which may accidentally fall.
• Before starting the lifting operations the whole of the machine handling
area, including the parking area for the means of transport and the
machine installation area, should be identified and inspected in order to
detect any potentially hazardous areas.
• Use a bridge crane, a crane or a forklift truck with adequate lifting
capacity. The use of inadequate lifting equipment may cause damage to
the machine or injury to personnel.