Gastrodomus SFO500B, User Manual

Page: 58 / 73

Chapter 4 - Installation
19
• Hook type 0-10000.
• Lifting brackets.
BEWAREE If the machine has been damaged during transport, inform the
manufacturer immediately. The manufacturer should also be informed if
there are differences between the "Packing list" and the goods actually
delivered.
BEWAREE The machine and its equipment should be protected from external
atmospheric agents. In particular water and damp can cause certain
machine components to rust, causing irreversible damage.
4.4 Preliminary operations
Check if the machine has been damaged during transport
Check the condition of the machine taking a close look at the outside and the inside. Any
deformation of the visible parts indicates that the machine has been hit by something during
transport. This could lead to malfunctioning.
Check the tightening of screws, bolts and fittings.
If damage has occurred
Damage caused by transport should be attributed to the carrier and the manufacturer or its
agent should be informed immediately of the situation.
Cleaning the machine
• Remove the dust and dirt deposited on the surface during transport.
• Carefully clean and dry each part (varnished or unvarnished) using soft, clean, dry cloths.
BEWAREE It is strictly forbidden to climb onto the box pallets and/or to stow them one
on top of the other.
• Should the box pallets remain outdoors for some time, waiting to be transported inside the
building, these box pallets should be covered with adequately-sized waterproof tarpaulins.
• If storage exceeds 3 months the box pallets should be stored inside, sheltered from bad
weather and protected from excessively high or low temperatures.
• If the machine is unpacked, it should be covered in order to prevent the build-up of dust
and dirt.
4.5 Installation
Features of the installation site
A suitable installation site should be chosen considering the overall dimensions of the
machine supplied in
2.1 Technical specifications on page 12, and in compliance with the
following rules:
• The power supply source, in compliance with the Power Supply Details on page 12 should