60
4. Clean the inner and outer surfaces of the housing, using a cloth, damped with a
little warm dishwater. Ensure not to drip any liquids into the housing of the appli-
ance.
WARNING:
Always ensure that the appliance and all parts of it are
out of
reach of young children
.
5. Dry the parts thoroughly after cleaning, and thereafter let dry naturally for approx.
1 hour, where it is out of reach of young children.
6. Reassemble the components to the appliance as described below. Ensure that the
lid and oil container are free from water after cleaning and before reassembling.
REASSEMBLING THE APPLIANCE
It is good advice to reassemble the appliance after cleaning. Thus you avoid dama-
ge to the parts of the appliance and the parts cannot get lost. Always let the parts of
the appliance dry completely, before reassembling.
1. Make sure that the container release slider is in open position (pulled outward).
2. Insert the oil container in the oven compartment. For this, hold of the oil contai-
ner by the brim, with the MIN/MAX filling level marks orientated towards the
hinge of the lid. Then,
without violence
, turn the oil container slightly back and
forth until it settles down in the oven compartment. Gently rotate the oil container
clockwise until it engages tangibly (to the stop). Push the oil container release
slider towards the oil container to lock the oil container safely in place.
Tip:
You cannot close the lid with the container release slider not closed completely.
3. Insert the control unit. For this, insert the heating rods in the oil container, while
the connector at the base of the control unit must slide on the power socket at the
housing of the appliance. Gently press down the control unit. The black body of
the control unit may not protrude the housing of the appliance.
4. Insert the basket. The opening in the centre of the basket must slide on the shaft
in the oil container, and the black plastic handle of the basket must be inserted
in the guide in the centre of the control unit.
Tip:
The basket is inserted correctly, if it stops in the upper position and can only be
lowered by pressing the basket release button.
5. Hold the basket release button pressed, while lowering the basket completely down.
