34
TECHNICAL SPECIFICATIONS
Model:
Art.-Nr. 42435 »Design Kettle Mini«
Power supply:
220/240 V AC, 50/60 Hz, 16 A
Power consumption:
max. 1.850 - 2.200 W
Length of power cord:
approx. 70 cm
Weight:
approx. 0.98 kg
Dimensions
(incl. Power Base)
:
approx. 210 x 140 x 210 mm
(width x depth x height)
Capacity:
0.3 litres (MIN) to 1.0 litres (MAX)
Temperature:
variable from 50°C to 100°C in steps of 5°C
Certification:
These specifications may change without notice.
PROPERTIES OF YOUR DESIGN KETTLE MINI
Your new Design Kettle Mini is intended for heating up drinking water to a selectable
temperature in the range between 50°C to boiling temperature (100°C). You may
cancel any running heating cycle at any time you like by pressing the ON/OFF but-
ton or removing the kettle from the power base.
Note:
There is no way to change the set temperature while a heating cycle is running
(ON/OFF button is illuminated). If you wish to set another temperature, you must
cancel any running heating cycle first (ON/OFF button gets dark). Thereafter, with
the appliance in standby mode, you may set a new temperature value.
IMPORTANT:
Always close the lid for operation. With the lid open, the temperature
control and automatic shut-off will not work properly and there will be high energy
loss.
IMPORTANT:
Depending on the water hardness of your drinking water, the appli-
ance needs regular de-scaling (see: ‘Care and Cleaning’). Otherwise, the tempe-
rature control will not work properly, there will be an increasing energy loss, and
overheating of the heating elements could occur.
SHORTCUTS
The temperature settings 100°C (boiling), 80°C, and 60°C are available via shortcuts.
Summary of Contents for DESIGN KETTLE MINI
Page 47: ...47...
