![background image](http://html1.mh-extra.com/html/gastroback/design-handmixer-pro/design-handmixer-pro_operating-instructions-manual_3717963067.webp)
67
Processing Your Food
WARNING:
Do not remove the chopper lid and/or grasp into the chopper
container or holding any type of objects into the chopper container with the
motor unit placed on the chopper lid.
Do not remove the motor unit, while the
motor is agitating. First switch OFF the appliance (slide the speed selector to “0”),
wait until the motor stops completely, and unplug the motor unit.
Before opening
the chopper system, always remove the motor unit from the chopper system.
CAUTION:
The chopper system will process your food in a few seconds. To
prevent the appliance from overheating, do not operate the motor continuously for
more than 15 seconds. Allow the appliance to cool down to room temperature
before using it again.
6. Ensure that the chopper system is assembled completely and correctly, with food
in the chopper container. Ensure that the motor unit is assembled and locked
securely to the chopper system (see above).
7. Ensure that the speed selector is switched to position “0”. Then connect the
motor unit to a suitable wall power outlet.
8. Slide the speed selector to “M”. Grasp the chopper container AND motor unit
by the handles.
9. Hold the “Pulse” button pressed for operating the motor. The motor will stop
moving, when the “Pulse” button is released.
Tip:
You may achieve better results, when operating the appliance in short pulses.
For most purposes, some short pulses will do. Avoid over-processing your food.
Removing the Motor Unit from the Chopper Container
CAUTION:
Do not attempt to remove the motor unit from the chopper lid during
operation. Always slide the speed selector to “0” (off) and unplug, before remo-
ving the motor unit from the chopper system. Always remove the motor unit from
the chopper lid, before removing the chopper lid from the chopper container.
Do
not place the motor unit on wet or inclined surfaces.
10. Release the “Pulse” button to stop operation. Slide the speed selector to “0” posi-
tion (off) and unplug the motor unit.
11. With one hand on the chopper lid, turn the motor unit counter-clockwise to the stop.
Then pull the motor unit upwards and out of the drive coupling of the chopper lid.