![background image](http://html1.mh-extra.com/html/gastroback/design-handmixer-pro/design-handmixer-pro_operating-instructions-manual_3717963050.webp)
50
Ensure that no one will pull the appliance by the power cord. Take
care not to entangle in the power cord. Always grasp the plug to dis-
connect the power cord.
• Do not touch the motor unit or power plug with wet hands, while
the appliance is connected to the power supply. Do not place the
motor unit on wet or metal surfaces to avoid risk of fire and electric
shock. Do not immerse the motor unit or power cord in water or any
other liquid.
DO NOT
spill or drip any liquids on the motor unit or the
power cord. Carefully avoid vigorous splashing of food and liquids
during processing. If required, use another accessory or speed.
The
appliance is not suited for processing hot food and liquids (above
60°C).
Evaporating steam could be sucked into the motor unit, dama-
ging the motor and causing risk of electric shock and/or fire.
• Always immediately wipe off liquids that are spilled or splashed onto
the motor unit. There are ventilation slits at the front and both sides of
the motor unit. Do not operate the appliance, when liquid splashed or
ran into the housing of the motor unit, thus getting into the interior of
the motor unit. In this case, immediately unplug the appliance. There-
after clean and dry the appliance thoroughly and leave the appliance
dry naturally for approx. 1 day.
MOVING PARTS - RISK OF INJURIES
• Some tools of the Design Hand Mixer Pro are equipped with very
sharp blades. During operation, the blades are moved on high
speed. Thus, the appliance could cause severe injuries when handled
improperly.
• Use caution, when handling the chopper knife or bar blender to avo-
id injuries. Always hold the bar blender and chopper knife by the
upper part of the shaft for handling.
• The bar blender and chopper knife may not be disassembled. Do not
attempt to assemble the chopper knife to the motor unit without the
chopper container. Do not poke in the drive wheel compartment or
the tool couplings via any type of foreign objects.
•
DO NOT ATTEMPT TO USE THE BAR BLENDER OR WIRE TOOLS