62
11. If required, stop operation (speed selector to “0”) in time, for scraping your food
down from wire tools and at the sides of the mixing container. For this, you may
use a plastic or rubber spatula. Thereafter continue mixing. Do not scrape off
food sticking to the inner walls of the mixing container via the spinning wire tools
to avoid damage.
12. After mixing, slide the speed selector to “0” (off) and wait until the wire tools
come to a complete standstill.
13. Take the wire tools out of your food. If required, scrape down food, still sticking
to the wire tools. Then immerse the wire tool in the provided dishwater.
14. Leave the motor operate for some seconds to remove any residues of food.
15. Slide the speed selector to “0” (off) and wait until the wire tools come to a com-
plete standstill. Unplug the motor unit.
Removing the Wire Tools
CAUTION:
Do not attempt to remove the wire tools by pulling them out of
the tool couplings with violence!
Always set the speed selector to “0”(off) and
unplug the appliance before removing the wire tools. When pressing the Ejection
button, the wire tools will fall out. Ensure that the wire tools will not fall down.
16. Ensure that the appliance is switched OFF (speed selector to “0”) and unplugged.
17. Hold the wire tools with one hand or hold them at a short distance over a con-
tainer or sink. Press the Ejection button for releasing the tool lock and for making
the wire tools fall out of the tool couplings.
18. Clean the appliance after each use to avoid that residues of food dry on the
surfaces.
USING THE BAR BLENDER
WARNING:
The blades of the bar blender are very sharp.
DO NOT grasp
into the bell-shaped end holding the blades to avoid severe injuries.
Always
ensure to keep your hands and any foreign objects (e.g. clothes, towels,
cooking utensils) away from the blades of the bar blender, when the bar blen-
der is installed at the motor unit to avoid severe injuries and damage.
Before
switching on the motor, always insert the blades of the bar blender into your food.
The bell-shaped end should be covered with food.