51
pre-progrAMMeD
shot voluMe – 1 cup
Press the 1 CUP once. A preset volume of
approximately 30mls will be extracted. The
machine will automatically stop once the
preset volume has been extracted.
note:
The amount of espresso extracted in
the cup will vary depending on your grind
size and dose amount.
pre-progrAMMeD
shot voluMe – 2 cups
Press the 2 CUP button once. A preset volu-
me of approx. 60mls will be extracted. The
machine will automatically stop once the
preset volume has been extracted.
note:
Pressing the 1 CUP or 2 CUP buttons
during a programmed espresso will immedi-
ately stop the extraction.
progrAMMing single espresso
1.
To begin programming, press the PRO
-
GRAM button once. The machine will beep
once and the program button will begin to
flash. This indicates the machine is in pro-
gramming mode.
2.
Press 1 CUP button to start espresso ex
-
traction. Press 1 CUP again once desired
volume of espresso has been extracted. The
machine will beep twice to indicate the new
1 CUP volume has been set.
progrAMMing DouBle espresso
1.
To begin programming, press the PRO
-
GRAM button once. The machine will beep
once and the program button will begin to
flash. This indicates the machine is in pro-
gramming mode.
2.
Press 2 CUP button to start espresso ex
-
traction. Press 2 CUP again once desired
volume of espresso has been extracted. The
machine will beep twice to indicate the new
2 CUP volume has been set.
resetting DeFAult voluMes
To reset the machine to the default 1 CUP and
2 CUP shot volumes, press and hold the PRO
-
GRAM button until the machine beeps three
times. Release the PROGRAM button. The ma
-
chine will return to its original default setting.
note:
Default settings: 1 CUP shot volume is
approx. 30ml. 2 CUP is approx. 60ml.
MAnuAl shot voluMe
Manually control low pressure pre-infusion
time and shot volume without re-program-
ming the pre-set shot volume.
• Press and hold the 1 CUP or 2 CUP but
-
ton. The extraction will enter low pressure
pre-infusion until the button is released.
• When the 1 CUP or 2 CUP button is relea
-
sed, extraction will continue at full pressure.
• Press the 1 CUP or 2 CUP button again
once the desired volume of espresso has
been extracted
MAnuAl espresso
Press and hold the 1 CUP or 2 CUP button.
Release the button once sufficient espresso
has been extracted into the cup.
note:
For optimal flavour when using a 1
CUP filter, you should extract approx. 30ml.
When using a 2 cup filter, you should ex
-
tract approx. 60ml.
WArning:
The metal parts of the portafil-
ter will be very hot.
Summary of Contents for Design Espresso Advanced Plus
Page 36: ...36...
