45
WARNING: The blades are very sharp. Handle with care to avoid injuries.
Do not immerse or place the motor base or power cord in any liquids or
pour any liquids on these parts.
5. Use a nylon brush or sponge and warm dish-water for cleaning the heating plate.
Doing so, be careful with the blades and do not damage the seal on the jar collar.
Soak stubborn residues with a drop or two of cooking oil for some minutes, before
cleaning.
Stubborn residues on the other surfaces can be removed better by moistening with some
warm dish-water before cleaning.
6. Wipe the power cord and the exterior of the motor base carefully with a soft
damp cloth. Always ensure not to spill any liquids in the motor base.
7. Thoroughly wipe the appliance and all its parts dry.
8. Re-assemble the glass jar.
Ensure that the sealing surfaces on the brim of the jar collar and glass part are clean and
without any damage (e.g. cracks, scratches, or signs of wear). Screw the glass part tight-
ly on the jar collar. Eventually check the glass jar for leaks using some water.
9. Dry the glass jar carefully. Then allow drying naturally for 1/2 hour. Always
ensure that the appliance and all its parts and accessories are out of reach of
young children.
Storage
WARNING:
Always unplug the appliance, let the appliance cool down sufficiently, and
clean the appliance and all its parts before storing. (See: „Care and Cleaning).
Do not
leave the appliance unattended while connected to the power supply.
Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight
and inadmissible strain (mechanical or electric shock, heat, moisture) and where it is out
of reach of young children. Place the appliance on a clean and stable surface, where it
can not fall. Do not place any hard or heavy objects on the appliance.
Handle the power cord with care. Power cords may never be knotted, twisted, pulled,
strained or squeezed. Do not place any hard or heavy objects on the power cord. Do not
wrap the power cord around the motor base.
Do not move the appliance, when the glass jar is mounted on the motor base.
1. To move the appliance, remove the glass jar from the motor base, grasp the motor
base with both hands at the handles on top of the housing, and ensure that the
power cord will not hang down. Place the motor base on a suitable surface where
it can not fall, and is out of reach of young children.
2. Carry the glass jar by the handle, and place the glass jar besides the motor base.
Notes for disposal
Dispose of the appliance must be effected in accordance with the corresponding local
regulations and requirements for electrical appliances. Please contact your local disposal
company.
