Gastroback 41406 Instructions For Use Manual Download Page 4

Design Mincer Electronic Pro

Please read all the advice and instructions with care and keep the manual. 

The mincer is used for mincing meat (uncooked or cooked) and soft vegetables. Please
prepare the ingredients before filling them into the feed chute. Using the pusher you
press the food slowly into the worm which pushes it against the spinning crossed-blade
knife. 

The knife and the worm are driven by a 1.000 watt motor. The finished mince discharges
through the grinding disc. The appliance has an overload protection which prevents
the motor form overheating.

The appliance is maintenance-free, very insusceptible and easy to use. All parts that
come into direct contact with the food are easily to remove and easy to clean. No
extra tools are necessary for assembling or disassembling the appliance.

Important safeguards

Please read all the advices and instructions with care and keep the manual.
Only use the appliance as stated and only for thus use. Any non-appropriate use
and misusage can cause damages and heavy personal injuries through voltage, fire and
moving units. Only proceed the appliance as described in the directions and for the
intended purpose. 

Never leave the appliance unattended when in operational

mode.

Reparation and technical maintenance of the appliance or line cord are just allowed
to be accomplished by an authorised specialist reparation shop.

Safeguards for Daily Operation

• Only use the appliance indoors. Do 

not

use the appliance in moving vehicles or

boats. Do 

not 

use the appliance outdoors. Only use units, spare parts and supplies

which are provided and recommended by the manufacturer. Damaged or improper units
may break in use, damage the appliance or cause risk of overheating, fire, electricity or
personal injury. 

Never

try to take the appliance to pieces or open it.

Never

leave children unsupervised when the appliance or units of the appliance are

in reach.

Never

let children play with the appliance or units of the appliance. Children

and invalid people have to be supervised using the appliance. 

Never

leave the mincer unattended. Keep the appliance well out of reach of

children. Store the appliance and units in a dry, clean area out of reach of children. 

• The work space has to be easily accessible, solid, even, dry and of sufficient
size. The mincer should only be set up on a firm level work surface. 

Never 

situate

26

41406_designfleischwolfelectronicpro_manual_GermanEnglisch_neu.qxp  20.10.2009  11:00  Seite 

Summary of Contents for 41406






















Reviews: