24
Program Files \ Biosystems \ Flash
Upload Utilities \ ToxiPro \ B.
Two calibration options are listed near the
bottom of the window.
Select “Calibrate Now” to automatically
perform a full calibration whenever an
instrument is placed in the dock.
Select “Skip Calibration” to automatically
skip the calibration of any instrument that is
placed in the dock.
For further details on Sperian
Instrumentation’s calibration
requirements, see Appendix B.
5.3 Certificates
The Certificates tab provides controls for the
automatic printing of Calibration and Bump
Test Certificates.
Click on the check box next to the option to
select it. Note that a great deal of
paperwork could be generated if “Print
Bump Certificates” is selected and a large
number of instruments are bump-tested
daily though the IQ Express Dock.
5.4 Session
Downloading
The session downloading tab contains the
file location for session downloads.
To change the destination directory for the
downloaded files, either type the address in
directly or use the “Browse” button to locate
the new folder.
To view stored data files in the download
folder, click on the “Show Data Files” button.
Once the data files are shown, if BioTrak
version 7.40 or later is installed, clicking on
one of the stored files will automatically
launch BioTrak.
6. Software
Revisions
Sperian Instrumentation will release new
versions of IQ Express software from time to
time. To install the new version, simply
place the disk in your PC’s CD-tray. The
upload will start automatically. You will be
prompted to confirm the update.
Click Yes. The status of the upload is
shown at the far right of the screen in the
dock’s information page.
The dock will also indicate that the Flash is
being uploaded.
CAUTION
Do not unplug the IQ
Express Dock or interfere with the flash
upload in anyway. Interfering with the
flash upload may result in damage to the
IQ Express Dock.
Once the upload is completed, you’ll need to
restart the PC for the new settings to take
effect.
Disconnect the PC from the IQ Express
Dock and click OK. Then restart the PC.
