D-Guard
2
55
17.4.
General Detector Repair
17.5.
Disposal of D-Guard
2
Components
With the exception of the gas sensing element and the hydrophobic membrane, D-Guard
2
contains no user
serviceable parts. If a fault develops, the detector must be returned to Gastech for repair. It is essential that
no attempt is made to repair a faulty detector by the end user since this may compromise the safety of the
unit resulting in certification non-compliance and create potential operational hazards that may endanger the
life of personnel.
When D-Guard
2
has reached the end of its service life it must not be treated as general waste.
The electro-chemical cells used to detect gas contain substances that could potentially create an
environmental hazard.
Under no circumstances should the cells be incinerated by the user since they could release toxic fumes.
When cells are replaced by Gastech, Gastech will properly dispose of the used items.
Disposal of the electronics, enclosure or any ancillary part of the detector must be done in accordance with
appropriate local government regulations.
By responsibly disposing of D-Guard
2
, you will be helping to minimise the possibility of negative environmental
and human impact, which could otherwise be occur through incorrect disposal of this product.
Summary of Contents for D-Guard2
