00250
AGDS-MC
v2
•
Gas Detection . (Up to 16 detectors, with power pack)
•
Natural gas, LPG, carbon monoxide & carbon dioxide
•
Remote emergency stops
•
Fire Alarm input monitoring
•
BMS relay (Settable)
•
5 year warranty - 10 years when commissioned
AGDS-MC features
Installation Instructions
The AGDS-MC
v2
is a multi channel gas detection system designed for use in boiler houses. Six low voltage
detectors can be connected ( 16 with a power pack) for the detection of natural gas, LPG, or carbon
monoxide, carbon dioxide and oxygen depletion.
In the event of a high alarm from one of the detectors, the system will isolate a connected control valve. Low
alarm indication is also given.
Even with the system switched off It can still be used to monitor for carbon monoxide and dioxide via its 0-
10v output and BMS relays. Should there be an issue from a solid fuel appliance it can raise an alarm or
switch ventilation on via a relay.
Before commencing installation please familiarise yourself to the equipment by reading the comprehensive
installation instructions. If in doubt then please call 0161 233 0600. Out of hours please call 07894 684080 or
07843 355163.
It is a statutory requirement that this safety system is installed and commissioned
to the satisfaction of the manufacturer.
A commissioning certificate must be issued to the end user along with instructions for the operation of the
equipment.
As the Manufacturer, Medem UK should commission this safety system whereupon a commissioning report
will be forwarded to the installing agent who should provide a copy to the end user.
At the point of our commissioning an individual serial number will be attached to the system along with a 24
help line number. Photos and all relevant information for the installation will then be stored on the Medem
site database to be accessed in the event of a call on the 24 hour help line. The warranty period for the pan-
el and sender unit will then be extended to Ten years.
