gassero wallcon 115, Installation, User & Service Manual

Page: 35 / 40

REV
.03-(16.03.2015)
CONTROLS
To comply with the Building Regulations, each section must have a tick in one or other of the boxes
TIME & TEMPERATURE CONTROLTO HEATING ROOM T/STAT& PROGRAMMER/TIMER PROGRAMMABLE ROOMSTAT
TIME & TEMPERATURE CONTROLTO HOTWATER CYLINDER T/STAT& PROGRAMMER/TIMER COMBI BOILER
HEATING ZONE VALVES FITTED NOTREQUIRED
HOTWATER ZONE VALVES FITTED NOTREQUIRED
THERMOSTATIC RADIATOR VALVES FITTED
AUTOMATIC BYPASS TO SYSTEM FITTED NOTREQUIRED
FOR ALLBOILERS CONFIRM THE FOLLOWING
THE SYSTEM HAS BEEN FLUSHED IN ACCORDANCE WITH THE BOILER MANUFACTURER’S INSTRUCTIONS?
THE SYSTEM CLEANER USED
THE INHIBITOR USED
FOR THE CENTRALHEATING MODE, MEASURE & RECORD
GAS RATE
3
ft/hr
BURNER OPERATING PRESSURE (IF APPLICABLE) mbar
CENTRALHEATING FLOW TEMPERATURE °C
CENTRALHEATING RETURN TEMPERATURE °C
FOR COMBINATION BOILERS ONLY
HAS AWATER SCALE REDUCER BEEN FITTED? YES NO
WHATTYPE OF SCALE REDUCER HAS BEEN FITTED?
FOR THE DOMESTIC HOT WATER MODE, MEASURE & RECORD
GAS RATE 3 ft/hr
MAXIMUM BURNER OPERATING PRESSURE (IF APPLICABLE) mbar
COLD WATER INLETTEMPERA TURE °C
HOTWATER OUTLETTEMPERATURE °C
WATER FLOW RATE lts/min
FOR CONDENSING BOILERS ONLYCONFIRM THE FOLLOWING
THE CONDENSATE DRAIN HAS BEEN INSTALLED IN ACCORDANCE WITH
THE MANUFACTURER’S INSTRUCTIONS?
YES
FOR ALLINSTALLATIONS CONFIRM THE FOLLOWING
THE HEATING AND HOTWATER SYSTEM COMPLIES
WITH CURRENTBUILDING REGULATIONS
THE APPLIANCE AND ASSOCIATED EQUIPMENTHAS BEEN INSTALLED AND COMMISSIONED
IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS
IF REQUIRED BYTHE MANUFACTURER, HAVE YOU RECORDED ACO/CO
2
RATIO READING? N/A YES CO/CO
2
RATIO
THE OPERATION OF THE APPLIANCE AND SYSTEM
CONTROLS HAVE BEEN DEMONSTRATED TO THE CUSTOMER
THE MANUFACTURER’S LITERATURE HAS BEEN LEFTWITH THE CUSTOMER
3 m/hr
3 m/hr
COMMISSIONING ENG’S NAME
PRINT DATE
SIGN
BOILER SERIALNo: BOILER MODEL:
GAS BOILER COMMISSIONING CHECKLIST
N/A
N/A