Press one time button (hour will blink)
Set hours with or
Press one time button (minutes will blink)
Start the machine and choose the desired mode (see precedent instructions).
When pressing this button
the display will indicate “SET” and the desired water temperature.
Adjust the desired value with
or and wait a few seconds till it is stored automatically.
3 symbols at the left bottom corner indicate the working information:
First symbol indicate the water flow:
Second indicate the fan:
Third indicate the compressor:During the start-time
delay the corresponding symbol will blink
Symbol indicates that the machine is defrosting.
Symbol indicates that the keyboard is locked.
To lock or unlock the keyboard press
and
simultaneously during several seconds.
6.3
Time Setting
6.4
Water Temperature Setting
6.5
Working Information
Set hours with or
Press one time button to confirm
The heat pump only operates whenever there is water flow circulating inside. All models are equipped with a water
flow switch that detects if the water pump is working or not.
“flow” LED lighting = water pump working.
“flow” LED not lighting = water pump stopped.
6.6
Water Flow Detection
15
