gassero Alubox Series, Installation, User And Service Manual

Page: 6 / 36

2 GENERAL
the following floor standing aluminium condensing gas boilers:
The Alubox series is suitable for use as a single boiler or as
part of a cascade system.
CE LABEL
The appliance complies with the basic
requirements of the relevant European
directives.
Conformity has been substantiated by the
proper documents which, together with
the declaration of conformity, are filed
with the manufacturer.
• Alubox 700
The boiler may only be used to heat up water for heating
systems as standard and/or domestic hot water (DHW)
systems with the connection of DHW tank.
The boiler can be installed either as a single system or as
part of a multiple system (cascade system). A cascade
system enables several boilers of this type to be
connected together, where maximum of 16 boilers
connected together.
CAUTION:
Damage to the installation due to frost.
Install the heating system in a room
which is free from frost.
WARNING:
Fire hazard due to flammable materials or
liquids.
Do not store any flammable materials or
liquids in the direct vicinity of the boiler.
CAUTION:
Boiler damage due to contaminated
combustion air or contaminated air in the
boiler room.
Never use the boiler in an environment which
contains lots of dust or aggressive chemicals.
Such as spray shops,hairdresser's shops,
locations where tricholorethylene or hydrogen
halides (e.g. contained in aerosols, certain
adhesives, solvents or detergents, paints)
and other aggressive chemicals are used or
stored.
2.1 DESIGNED TO USE
2.3 BOILER ROOM & VENTILATION
These installation and maintenance instructions apply to
General
The Alubox is a floor standing aluminium condensing boiler
for CH and DHW(with DHW tank) purposes, with pre-mix
burner, made up of cast aluminium sectioned heat exchanger.
The
Alubox boilers can be combined in a cascade
configuration with other heat generators to create
modular heating plants made up of boilers connected to
the same water circuit and with electronic controllers
communicating via bus.
2.2 DESCRIPTION OF THE APPLIANCE
The individual heating units in cascading configuration
can be activated, as well as by simple rotation, in such a
way that when a certain percentage of output is reached
by the first unit, the other units start automatically, all with
the same load factor.
The main features of the Alubox Boilers are:
- fiber coated premix burner
- output 540,700,1100 kW
- heat output up to 17.600 kW, by connecting up to 16
boilers in a cascading configuration
- flanged connection of the water and gas headers
- microprocessor control with self-diagnosis, shown on
LED and the display
- frost protection function activated according to the out-
side temperature and/or the temperature of the boiler
- fitted for room thermostat in the high and low tempera-
ture zones
- outside probe to enable the climate control function
- priority settable on the DHW, high or low temperature
circuit
-
- low investment costs for cascade operations ( slave - chimney sweep function
-
- solar system & swimming pool control functions
models can be controlled by Master models, without
using any display modules in slave units)
• Alubox 1100
• Alubox 540