cod. 19501162
ENGLISH
g
22
1.0 INTRODUCTION
This booklet describes the regulations for use, maintenance for
seeding machine.
This booklet is an integrating part of the product, and must be
kept in a safe place for consultation during the whole life span of
the machine.
ATTENTION
The customer should instruct personnel on accident risks, on
the operator safety devices provided, on noise emission risks
and on general accident prevention regulations provided for by
the international directives and by the law in the country in which
the machines are used.
In any case, the machine should be used exclusively by skilled
operators who will be held to follow scrupulously the technical
and accident-prevention instructions in this manual.
It is the user's responsibility to check that the machine is operated
only in optimum conditions of safety for people, animals and
property.
The product complies with the following European Standards:
- 98/37 CE Machine Directive that abrogates and includes
Directives 89/392 EEC, 91/368 EEC, 94/44 EEC and 93/68 EEC.
- 89/336 EEC (Concerning the bringing together of member
countries' regulations on electrical material destined for use
within certain voltage limits).
For machine conformity the following standards have been used:
- EN 292-1:1992 (Safety of machinery) Basic concepts, general
design principles. Terminology and basic methodology.
- EN 292-1 A/1:1992
- EN 292-2:1992 (Safety of machinery) Basic concepts, general
design principles. Technical specifications and principles.
- EN 294:1993 (Safety of machinery) Safety distances to prevent
danger zones being reached by the upper limbs.
- EN 982:1997 (Safety of machinery) Safety requirements
regarding systems, and their components, for hydraulic and
pneumatic drives.
- EN 1553:1999 (Agricultural machines) Self-propelled
agricultural machines, mounted, semi-mounted and towed -
Common safety requirements.
- pr EN 144045 (Planting units - Safety) document CEN/TC 144
WG 3 n° 347 - May 2000 edition.
1.1 DESCRIPTION OF THE SEEDER
This farming implement, can only be operated by a farming tractor
equipped with lift unit and universal three-point hitch.
The seeder is suitable for use (by itself), or combined with
equipment for working the land (harrow).
It is suitable for sowing cereal
: wheat, barley, rye, oats, rice.
For minute and forage seeds
: rape, clover, sedge, rye-grass.
For coarse seeds
: soya, peas.
Seeds are laid down on the ground by means of ploughing
devices, planter shoe or single, and they are distributed
continuously.
The quantities to distribute are set through a seed distributor, the
motin of which derives from the crawler wheel through traction.
The arms of the furrowing tools, independent of each other, di-
spose of a wide margin of oscillation to adapt to the surface of the
ground.
ATTENTION
The seeder is suitable only for the uses indicated. Any other
use different from that described in these instructions could
cause damage to the machine and represent a serious hazard
for the user.
Regular operation depends on the correct use and adequate
maintenance of the equipment. It is advisable therefore to observe
scrupulously what is described in order to prevent any
inconveniences that could prejudicate proper operation and
duration. It is just as important to keep to what is described in this
booklet since
the Manufacturer declines all responsibility due
to negligence and non-observance of these rules
.
At any rate the Manufacturer is available to assure immediate
and accurate technical assistance and all that may be necessary
for the improved operation and better performance of the
equipment.
1.2 GUARANTEE
- On delivery, check that the equipment has not been damaged
during transport and that the accessories are integral and com-
plete.
- Possible claims must be presented in writing within eight days
of receipt.
- The purchaser will enforce his rights on the guarantee only
when he has respected the conditions concerning the benefit
of the guarantee, set out in the supply contract.
- The guarantee is valid for a year, against all defects of material,
from the date of delivery of the equipment.
- The guarantee does not include working and shipping costs
(the material is shipped at the consignees own risk).
- Obviously, all damage to persons or things are excluded from
the guarantee.-
- The guarantee is limited to the repair or replacement of the
defective piece, according to the instructions of the
Manufacturer.
Dealers or users may not claim any indemnity from the
Manufacturer for any damage they may suffer (costs for labor,
transport, defective workmanship, direct or indirect accidents, loss
of earnings on the harvest, etc.).
