Gaspardo GENIUS, Use And Assembly Instructions / Spare Parts, Page: 16 / 37

USE AND MAINTENANCE
ENGLISH
g
cod. G19502880
42
4.4 SETUP PAGE
This page is used to enter and program all the parameters required for correct system operation when the machine is not running.
Press the button to access the SETUP page (Fig. 23).
fig. 24
fig. 23
8 7
6 5
Table 4
1. OPERATOR SETUP 1. Display Contrast
Brightness
2. Speed Sensor Factor S.S.F. [0,00778] m/pulse
Auto-Cal Routine
3. Customise Product Seed / Fert
Rate
Step
[5 %]
[Kg/Ha] / Seed/m²
4. Time / Date
5. Helpline
6. Language
7. Drill Width
2. DRILL CONFIG. Menu protetto da codice PIN.
3. FACTOR SETUP
Menu protetto da codice PIN.
4. DIAGNOSTICS 1. Pro Series
2. Metering Unit
3. Tramline Module
4. History
1
st
Level 2
st
Level Parameter Setting [default]
Informazioni utili al Servizio Assistenza
per eventuale soluzione problemi.
The SETUP page features the following menus:
1) OPERATOR SETUP;
2) DRILL CONFIG;
3) FACTORY SETUP;
4) DIAGNOSTICS;
5) Drill Setup;
6) Cal Check;
7) Tramline;
8) Alarms.
To select these menus, press the function buttons followed by ENTER or directly key in the menu ID number using the
keypad.
4.4.1 OPERATOR SETUP
SETUP OPERATOR SETUP Display
Display (Fig. 24): this function is used to adjust the screen brightness and contrast.
Press the arrows to select the option that needs to be changed.
Press the arrows to adjust the intensity.
Press ENTER to confirm or ESC to go back to the previous menu.