Gason Pasture Planter, Assembly/Operators/Parts Manual

Page: 18 / 106

Pasture Planter Meterbox - Adjustments
Page 14
10/09
Removal of Meterwheel Cover Plate
It may be necessary to remove the
meterwheel cover plate from inside of the
meterbox for lightweight and large seed if high
rates are required.
To remove the cover plate you will need to
have the bin empty. Gaining access through the
clean out hatch, remove the M8 nyloc nut
retaining the cover plate with a 13mm ratchet
ring spanner (Refer Fig.16). Fitting cover plate is
the reversal of this procedure.
Always re-calibrate Pasture Planter after
removal or fitting of cover plate.
Fig. 15 Cover plate fitted and removed.
Fig.16 Access to remove cover plate through
clean out hatch.
Changing Meterwheel
It is possible to replace the standard
meterwheel with a more aggressive and deeper
meterwheel if metering large and light seeds at
high rates.
Refer parts section for more detail.