background image

The gas valve can be adjusted from “OFF to “HIGH” and 
this will affect the cooking time.

Gas Valve “ON” Max.

The gas lever is in a straight line with the gas valve to the 
venturi tube.

Gas valve “OFF” 

The gas lever is at right angles to the gas valve and the 
venturi tube.

Spillage

Turn off the cylinder gas valve. Wait for the flame to go out. 
Using heat proof gloves: 
•  Remove cooking pan. 
•  Blow liquid from burner ports. 
•  Tip burner upside down to drain spilled liquid. 
•  Once dry re-position. 
•  Follow lighting procedures to re-light burner and  
  continue cooking.

Primary Air Disk

Gas Inlet

Gas Valve “ON”

Gas Valve “OFF”

•  Do not smoke when attempting to ignite  
 appliance.
•  Always use protective gloves when handling  
  hot components.
•  Do not smoke at any time when attempting  
  to ignite the appliance burners.  
 Caution: Do not move the appliance while in  
 operation.
•  Do not leave the appliance unattended  
  when alight.
NOTE: ONLY USE ON A NON-COMBUSTIBLE SURFACE

For any queries or assistance call

Customer Service

Australia Only

1300 174 876

Hours of operation: 

Monday to Friday 8.00am - 5.00pm EST

Do not return to place of purchase.

Keep your purchase receipt, this will be required to make any claims 

under the 12 month warranty.

OPERATING PROCEDURE

IMPORTANT

Summary of Contents for RB2









Reviews: