Gasmate ORBITOR BQ1079, Manual, Page: 9 / 16

8 9
STEP 4
a) Align the holes on the lower right front side and lower right back side of the body assembly
with the holes on the right leg (J).
b) Insert one bolt (BB) into each pre-drilled hole
and seal it with one flat washer (DD),
one spring washer (CC) and one nut (EE).
c) Repeat the procedure for the left leg (I).
d) Go back and tighten all the bolts using
the screwdriver provided.
BB M5 X 10 Bolt 8 PCS
DD Flat Washer 8 PCS
CC M5 Spring Washer 8 PCS
EE M5 Nut 8 PCS
Step 3
a) Insert the bolts on left handle (A) into each pre-drilled hole and seal one flat washer (HH),
one spring washer (GG), and one nut (II) in sequence.
b) Repeat the procedure for the right handle (A).
c) Tighten all the nuts using the wrench provided.
HH Flat Washer 4 PCS
GG Spring Washer 4 PCS
II M6 Nut 4 PCS